Requests accepted 24 hours a day, 7 days a week Call 866-896-2687
Leaks

10 Signs of a Hidden Plumbing Leak in Your Home

Most hidden leaks announce themselves long before water appears. Here are ten signs to watch for, the meter test that confirms them and where leaks hide in North Texas homes.

Most homeowners find out about a hidden leak late: a bill that jumped, a stain that appeared, a floor that started to buckle. The signs of a hidden water leak show up earlier than that, though, if you know where to look. Ten of them are listed below, along with the one test that confirms a leak and the places North Texas homes tend to hide them.

A single sign can have an innocent explanation. Two or three together, especially with a moving water meter, are worth acting on.

First, the meter test

Before reading the list, run the check that settles the question. Stop all water use in the house, including the ice maker, irrigation and any softener, then read the meter. EPA’s WaterSense program, on its Fix a Leak Week page, says to wait two hours with no water used and read it again: “If the meter changes at all, you probably have a leak.”

If the meter moves, a leak exists somewhere between the meter and your fixtures. Rule out a running toilet (EPA suggests a few drops of food coloring in the tank; color in the bowl after ten minutes means the flapper leaks), a dripping hose bib and the irrigation system first. Then look at the signs below.

10 signs of a hidden plumbing leak

  1. A rising water bill with no change in habits. Compare with the same month last year, preferably in winter when sprinklers are off. EPA estimates the average household loses more than 9,300 gallons a year to leaks.
  2. A meter that moves with everything off. This is the test above, and the strongest single indicator.
  3. A musty or earthy smell. Persistent dampness gives off a smell in closets, under cabinets or at the base of walls even when nothing looks wet.
  4. Stains on ceilings and walls. Brown or yellow rings, bubbling paint or peeling wallpaper. A stain that grows or keeps returning after painting means the source is still active.
  5. Warped, cupped or buckling floors. Wood planks that lift at the edges, laminate that swells or tile that cracks in a line can all follow moisture from below.
  6. Mold or mildew. Visible growth in corners, around baseboards or on drywall needs moisture to survive. Find the source or it comes back.
  7. Warm spots on the floor. A hot-water line leaking under a slab can warm the concrete above it. Walk barefoot across tile in the morning.
  8. Low or falling water pressure. A leak bleeds flow before it reaches the fixtures. If pressure dropped suddenly and the aerators are clean, see the guide to what causes low water pressure.
  9. Sounds in the walls or floors. A hiss, trickle or rush of water when everything is off.
  10. A water heater that cycles or runs more than it used to. A hot-water leak forces the heater to keep heating fresh water, so it fires more often and the energy bill rises.

Any of these with a moving meter calls for professional leak detection.

Where leaks hide in DFW homes

Under the slab. Many North Texas homes sit on concrete slabs over clay. The Texas Water Development Board describes Houston Black clay, the state soil, as having very high shrink-swell potential, and the Dallas County soil survey names it as the most extensive soil type in the county. As that soil moves, lines under the slab are stressed. Older homes are likelier to have supply lines in or under the slab; Census estimates put the median home in Garland at 1978 and Irving at 1986. The guide to how to tell if you have a slab leak covers the tests for this case.

In the attic. Homes with overhead plumbing often run lines across the attic. A leak there shows up as ceiling stains below, often after the leak has been running a while. Heater and air-conditioner condensate lines also leak into ceilings and are easy to confuse with supply leaks.

In exterior walls. Pipes in exterior walls and hose bib connections can leak into the wall cavity for a long time before any stain appears.

Under and behind fixtures. Supply lines to toilets, sinks, dishwashers, refrigerators and washing machines are common failure points. Look in the cabinet under every sink and behind appliances.

Outdoors. The line from the meter to the house can leak into soil. Signs are an unusually green or soggy patch, pooling near the meter, or a drop in pressure with no sign inside.

What leak detection pros use

A plumber typically combines several methods rather than relying on one:

  • Pressure testing to confirm which line leaks, often by isolating the hot side from the cold.
  • Acoustic listening with sensitive microphones to hear water escaping, including through concrete.
  • Thermal imaging to show warm or wet areas behind surfaces without opening them.
  • Moisture meters to map damp areas in walls and floors.
  • Camera or tracer gas for some drains and difficult lines.

The aim is to locate the leak to a small spot so the opening is small. Leak detection explains the process, and slab leak repair covers lines under the foundation.

What you can do now

  • Take the meter reading and note the time.
  • Photograph stains, warped flooring and meter readings with dates.
  • If you suspect an active leak, shut off the water at the main while you are out. The guide to shutting off your main water supply shows where to look.
  • If water is near outlets or appliances, turn off the breaker for that area before going near it.
  • Do not cut into walls or floors yourself.

Getting help

If you suspect a leak and would rather not call around, call 866-896-2687 or send a request, and a local plumber will usually call back to confirm details and book a time. You review the written estimate before approving work.

Need a hand with this?

A local plumber will usually call to confirm the details, whether you’re in Garland, Irving, Allen or elsewhere in North Texas.

Quick answers

How can I tell if I have a leak if I see no water?

Use the water meter. Turn off everything that uses water, then read the meter and read it again after two hours. EPA's WaterSense program says that if the meter changes at all, you probably have a leak. It will not say where, but it confirms there is something to find before you start opening walls.

How much water can a small hidden leak waste?

More than most people expect. EPA says the average household wastes more than 9,300 gallons a year to leaks, and that a faucet dripping once per second wastes more than 3,000 gallons a year. A pinhole in a pressurized line can lose water around the clock for months without leaving a puddle.

Can a hidden leak cause mold?

Yes. Mold needs moisture, and a slow leak inside a wall, under a floor or in an attic provides it for as long as the leak runs. A persistent musty smell with no visible source is a reason to check for a leak, not just to freshen the air. Mold that is already visible or widespread is a separate issue, and the leak must be fixed first.

Where do leaks hide in North Texas houses?

Most commonly in the supply lines under the slab, in the attic, in exterior walls and under sinks and behind appliances. Slab homes sit on clay that shrinks and swells with moisture, which stresses the lines beneath. A plumber will test which side of the water heater the leak is on before deciding where to look.

What equipment do leak detection plumbers use?

The usual toolkit is a pressure test to confirm a leak on a given line, acoustic listening equipment to hear it, thermal imaging to spot warm or wet areas, moisture meters and sometimes camera inspection or tracer gas. The goal is to locate the leak to a small spot so only a small opening is needed.

Need a plumber today?

Call or send a request. A local plumber will usually get back to you to confirm the details. Requests are accepted around the clock.

Call 866-896-2687 Request Help