Requests accepted 24 hours a day, 7 days a week Call 866-896-2687
Plumbing service

Plumbing Installation & Fixture Replacement Help in Dallas–Fort Worth

Requests accepted 24/7Nine North Texas cities

Some plumbing jobs are not repairs. You want the old faucet gone and the new one in, a second bathroom roughed in during a remodel, a gas line run to the new range, a softener fitted because the shower glass is permanently clouded. The work is planned rather than urgent, which means you have time to choose the fixture, understand what the job involves and pick a plumber deliberately.

Plumber True Services takes requests across Dallas–Fort Worth for plumbing installation and fixture replacement. We’ll help you find a local plumber for this work. Call 866-896-2687 or send a request, and if a plumber serving your area is available they will usually call to confirm details and schedule a visit.

Plumbing installation requests we take

Installation requests fall into a few groups, and most plumbers handle all of them:

  • Fixture replacement: faucets, kitchen and bathroom sinks, toilets, shower valves and trim, tub spouts and drains, bidet seats.
  • Appliances with water or gas connections: water heaters and tankless units, garbage disposals, dishwashers, refrigerator and ice maker lines, washing machine supply boxes.
  • Remodel plumbing: rough-in for a new or relocated bathroom or kitchen, moving a sink or toilet, adding a wet bar or outdoor kitchen, then trim-out when the finishes are in.
  • Gas piping: a new or extended line to a range, dryer, outdoor grill, fire pit or generator.
  • Water quality equipment: whole-house softeners, carbon filters, reverse-osmosis drinking water systems.

If what you need is a fix rather than a new fixture, the faucet and sink repair and toilet repair pages are the better starting point.

Like-for-like swap or new work? It changes the permit

Texas cities set their own permit rules, but the pattern across North Texas is consistent enough to plan around.

Job Permit usually needed?
Replacing a faucet, toilet or disposal in the same spot with the same connections Usually not
Replacing a water heater, tank or tankless Yes, in most cities, with inspection
Any new or extended gas line Yes, with a pressure test and inspection
Moving or adding a fixture, new drain or supply lines (remodel rough-in) Yes
Water softener or whole-house filter Varies by city

The plumber should know the rule in your city and pull the permit when one is needed. If a plumber proposes skipping a permit on work that clearly needs one, that is a reason to choose someone else.

Kitchen and bathroom remodels

Remodel plumbing happens in two visits. Rough-in, with walls and floors open, runs or moves the drain, waste, vent and supply lines and sets shower valves and pans, followed by a city inspection. Trim-out, after tile, cabinets and countertops, connects and tests the fixtures.

Two local realities: most DFW houses sit on a slab, so moving a toilet or shower drain means cutting concrete, and the plumber should say so early; and the plumber needs the actual fixtures, or at least their rough-in specifications, before the first visit, because valve depths and drain locations differ by model.

Gas lines need a licensed plumber in Texas

In Texas, installing, extending or altering gas piping is plumbing work that must be done by a plumber licensed by the Texas State Board of Plumbing Examiners, with a permit and inspection in most cities. That covers the line to a new range or dryer, a stub for an outdoor grill, and the upsizing a tankless water heater often needs. The plumber pressure-tests the new piping before it is inspected. Do not let a handyman or an appliance delivery crew run gas pipe.

Softeners and filters for North Texas water

Much of the northern suburbs, including Frisco, McKinney and Allen, receive water treated by the North Texas Municipal Water District, and it is moderately hard: spotted glass, scale on faucets, sediment in the water heater. A whole-house softener goes on the main line after the shut-off valve, needs a drain for its regeneration cycle and a bypass loop, and usually lives in the garage or a utility closet. Carbon filtration can be added for taste and chlorine, and an under-sink reverse-osmosis unit handles drinking water only. Ask the plumber to size the softener to the household and to confirm where the discharge can drain under your city’s rules.

Small installs that prevent big problems

  • Frost-proof hose bibs replace the standard spigots that split in a freeze.
  • A recessed washing machine box with braided stainless supply lines replaces rubber hoses, which fail without warning and flood a laundry room.
  • A dedicated ice maker line with a shut-off beats the saddle valves found in many older kitchens, which leak.
  • A quarter-turn main shut-off replaces a seized gate valve so you can actually turn the water off in an emergency.

Before the plumber arrives

Decide what you want installed and have it on site, or ask the plumber to supply it. Measure the space: a toilet’s rough-in distance from the wall, a sink cutout, the cabinet under a disposal. Clear the work area and know where the main shut-off is. What to do before a plumber arrives has a short checklist, Questions to ask before approving a plumbing estimate covers what a good written quote includes, and if a water heater is part of the plan, Tankless vs traditional water heaters helps with the first decision.

What happens after you call or send a request

  1. Tell us the problem and your address or ZIP. Call or use the request form. Say what you want installed and, if you have one, the fixture make and model.
  2. A local plumber usually calls you back. If a plumber who handles installation work is available in your area, they usually call to confirm the details and book a time.
  3. Review the written estimate. The plumber gives you an estimate in writing, and no work starts until you approve it.

Where we take installation requests

Fixture upgrades and remodel plumbing are requested across the region, from newer subdivisions in Little Elm and Frisco where homeowners are replacing builder-grade fixtures, to established homes in Grapevine and McKinney being remodelled room by room. See all North Texas service areas.

Related help: Pipe leak and repiping for supply lines that need replacing during a remodel, Water heater repair and replacement and Garbage disposal installation.

Plumbing Installations & Fixture Replacement: common questions

Do I need a permit to replace a toilet or faucet in Texas?

Generally not for a like-for-like swap: a new toilet, faucet or disposal in the same location using the existing supply and drain connections usually does not need a permit in North Texas cities. Moving a fixture, adding new drain or supply lines, replacing a water heater or running gas piping does. The plumber should know your city's rule and pull the permit when one is needed.

Can a handyman run a gas line to my new range?

No. In Texas, gas piping inside a residence is plumbing work that must be done by a plumber licensed through the Texas State Board of Plumbing Examiners, and most cities require a permit, a pressure test and an inspection. Appliance delivery crews can connect a range to an existing, correctly placed gas valve with a flexible connector, but running or extending the pipe itself is the plumber's job.

Should I buy the fixture myself or let the plumber supply it?

Either works; just decide before the visit. If you buy it, you control the style and the plumber installs it, but a defect in the fixture is between you and the retailer. If the plumber supplies it, they typically stand behind both the part and the installation, and they know which models fit your existing rough-in. Ask which they prefer and whether the estimate changes.

What is the difference between rough-in and trim-out?

Rough-in is the plumbing done while walls and floors are open: drain, waste and vent lines, supply stubs, shower valves and tub or shower pans, followed by a city inspection. Trim-out is the second visit after tile, cabinets and countertops are in, when faucets, sinks, toilets, shower trim and the disposal are connected and tested. Both are typically on one permit for a remodel.

Do I need a water softener in North Texas?

It is a comfort choice rather than a safety one. Water across much of Dallas–Fort Worth is moderately hard, which means scale on fixtures and glass, more soap use and sediment in the water heater over time. A softener reduces all of that and can extend the life of a tankless water heater in particular. Ask the plumber to size the unit to your household and to confirm where the regeneration discharge can drain under your city's rules.

How long does a fixture replacement take?

A straightforward faucet, toilet or disposal swap is usually finished in an hour or two once the plumber is on site with the fixture. Jobs run longer when the old shut-off valves are seized and need replacing, when the drain or supply does not line up with the new fixture, or when corrosion or a hidden leak turns up behind the old one. A good estimate will say what is included and what would change it.

Need plumbing installations & fixture replacement help today?

Call or send a request about plumbing installations & fixture replacement. A local plumber will usually get back to you to confirm the details. Requests are accepted around the clock.

Call 866-896-2687 Request Help